From 72afd686c03073da2499e5e5ed7ee079837d7d44 Mon Sep 17 00:00:00 2001 From: DashieTM Date: Sun, 28 Sep 2025 18:42:15 +0200 Subject: [PATCH] wip --- modules/programs/niri.nix | 418 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 418 insertions(+) diff --git a/modules/programs/niri.nix b/modules/programs/niri.nix index 93f7f45..ac160a4 100644 --- a/modules/programs/niri.nix +++ b/modules/programs/niri.nix @@ -43,6 +43,424 @@ in { niri xwayland-satellite ]; + + xdg.configFile."niri/config.kdl" = { + text = + /* + kdl + */ + '' + input { + keyboard { + xkb { + layout "enIntUmlaut" + } + repeat-delay 200 + repeat-rate 25 + numlock + } + + touchpad { + tap + natural-scroll + } + + mouse { + accel-speed 0.2 + accel-profile "flat" + } + focus-follows-mouse max-scroll-amount="25%" + } + + // Outputs + output "DP-1" { + mode "3440x1440@180" + scale 1 + transform "normal" + position x=2560 y=0 + } + + output "DP-2" { + mode "2560x1440@165" + scale 1 + transform "normal" + position x=0 y=0 + } + + output "DP-3" { + mode "1920x1080@144.001" + scale 1 + transform "90" + position x=6000 y=0 + } + + layout { + // Set gaps around windows in logical pixels. + gaps 10 + center-focused-column "never" + always-center-single-column + + preset-column-widths { + proportion 0.33333 + proportion 0.5 + proportion 0.66667 + } + + default-column-width { proportion 0.5; } + // You can change how the focus ring looks. + focus-ring { + width 3 + inactive-color "#505050" + active-gradient from="#ff0000" to="#0000ff" angle=45 + } + + border { + off + } + + // You can enable drop shadows for windows. + shadow { + on + softness 30 + spread 5 + offset x=0 y=5 + color "#0007" + } + } + + // Autostart + spawn-at-startup "ironbar" + spawn-at-startup "oxinoti" + spawn-at-startup "oxipaste_daemon" + + // To run a shell command (with variables, pipes, etc.), use spawn-sh-at-startup: + // spawn-sh-at-startup "qs -c ~/source/qs/MyAwesomeShell" + + hotkey-overlay { + skip-at-startup + } + + // Uncomment this line to ask the clients to omit their client-side decorations if possible. + // If the client will specifically ask for CSD, the request will be honored. + // Additionally, clients will be informed that they are tiled, removing some client-side rounded corners. + // This option will also fix border/focus ring drawing behind some semitransparent windows. + // After enabling or disabling this, you need to restart the apps for this to take effect. + prefer-no-csd + + // You can change the path where screenshots are saved. + // A ~ at the front will be expanded to the home directory. + // The path is formatted with strftime(3) to give you the screenshot date and time. + screenshot-path "~/Pictures/Screenshots/Screenshot from %Y-%m-%d %H-%M-%S.png" + + // You can also set this to null to disable saving screenshots to disk. + // screenshot-path null + + // Animation settings. + // The wiki explains how to configure individual animations: + // https://yalter.github.io/niri/Configuration:-Animations + animations { + // Uncomment to turn off all animations. + // off + + // Slow down all animations by this factor. Values below 1 speed them up instead. + // slowdown 3.0 + } + + // Block screencapture + window-rule { + match app-id=r#"^org\.keepassxc\.KeePassXC$"# + match app-id=r#"^org\.gnome\.World\.Secrets$"# + + block-out-from "screen-capture" + } + + window-rule { + match app-id=r#"^nheko$"# + match app-id=r#"^vesktop$"# + + open-maximized true + } + + // General rules + window-rule { + geometry-corner-radius 12 + clip-to-geometry true + } + + + binds { + // Keys consist of modifiers separated by + signs, followed by an XKB key name + // in the end. To find an XKB name for a particular key, you may use a program + // like wev. + // + // "Mod" is a special modifier equal to Super when running on a TTY, and to Alt + // when running as a winit window. + // + // Most actions that you can bind here can also be invoked programmatically with + // `niri msg action do-something`. + + // Mod-Shift-/, which is usually the same as Mod-?, + // shows a list of important hotkeys. + Mod+Shift+Slash { show-hotkey-overlay; } + + // Suggested binds for running programs: terminal, app launcher, screen locker. + Mod+T hotkey-overlay-title="Open a Terminal: alacritty" { spawn "kitty"; } + Mod+R hotkey-overlay-title="Run an Application: fuzzel" { spawn "oxirun"; } + Super+Shift+L hotkey-overlay-title="Lock the Screen: hyprlock" { spawn "hyprlock"; } + Mod+F hotkey-overlay-title="Browser: Zen" { spawn "zen"; } + Mod+G hotkey-overlay-title="Run oxicalc" { spawn "oxicalc"; } + Mod+A hotkey-overlay-title="Run Clipboard manager" { spawn "oxipaste"; } + Mod+D hotkey-overlay-title="Run Shutdown window" { spawn "oxishut"; } + Mod+M hotkey-overlay-title="Run Notification Center" { spawn "oxidash"; } + + // Use spawn-sh to run a shell command. Do this if you need pipes, multiple commands, etc. + // Note: the entire command goes as a single argument. It's passed verbatim to `sh -c`. + // For example, this is a standard bind to toggle the screen reader (orca). + // Super+Alt+S allow-when-locked=true hotkey-overlay-title=null { spawn-sh "pkill orca || exec orca"; } + + // Example volume keys mappings for PipeWire & WirePlumber. + // The allow-when-locked=true property makes them work even when the session is locked. + // Using spawn-sh allows to pass multiple arguments together with the command. + XF86AudioRaiseVolume allow-when-locked=true { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.1+"; } + XF86AudioLowerVolume allow-when-locked=true { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.1-"; } + XF86AudioMute allow-when-locked=true { spawn-sh "wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle"; } + XF86AudioMicMute allow-when-locked=true { spawn-sh "wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle"; } + + // Example brightness key mappings for brightnessctl. + // You can use regular spawn with multiple arguments too (to avoid going through "sh"), + // but you need to manually put each argument in separate "" quotes. + XF86MonBrightnessUp allow-when-locked=true { spawn "brightnessctl" "--class=backlight" "set" "+10%"; } + XF86MonBrightnessDown allow-when-locked=true { spawn "brightnessctl" "--class=backlight" "set" "10%-"; } + + // Open/close the Overview: a zoomed-out view of workspaces and windows. + // You can also move the mouse into the top-left hot corner, + // or do a four-finger swipe up on a touchpad. + Mod+W repeat=false { toggle-overview; } + + Mod+Q repeat=false { close-window; } + + Mod+Left { focus-column-left; } + Mod+Down { focus-window-down; } + Mod+Up { focus-window-up; } + Mod+Right { focus-column-right; } + Mod+J { focus-column-left; } + Mod+K { focus-window-down; } + Mod+L { focus-window-up; } + Mod+semicolon { focus-column-right; } + + Mod+Ctrl+Left { move-column-left; } + Mod+Ctrl+Down { move-window-down; } + Mod+Ctrl+Up { move-window-up; } + Mod+Ctrl+Right { move-column-right; } + Mod+Ctrl+J { move-column-left; } + Mod+Ctrl+K { move-window-down; } + Mod+Ctrl+L { move-window-up; } + Mod+Ctrl+semicolon { move-column-right; } + + // Alternative commands that move across workspaces when reaching + // the first or last window in a column. + // Mod+J { focus-window-or-workspace-down; } + // Mod+K { focus-window-or-workspace-up; } + // Mod+Ctrl+J { move-window-down-or-to-workspace-down; } + // Mod+Ctrl+K { move-window-up-or-to-workspace-up; } + + Mod+Home { focus-column-first; } + Mod+End { focus-column-last; } + Mod+Ctrl+Home { move-column-to-first; } + Mod+Ctrl+End { move-column-to-last; } + + Mod+Shift+Left { focus-monitor-left; } + Mod+Shift+Down { focus-monitor-down; } + Mod+Shift+Up { focus-monitor-up; } + Mod+Shift+Right { focus-monitor-right; } + Mod+Shift+H { focus-monitor-left; } + Mod+Shift+J { focus-monitor-down; } + Mod+Shift+K { focus-monitor-up; } + Mod+Shift+L { focus-monitor-right; } + + Mod+Shift+Ctrl+Left { move-column-to-monitor-left; } + Mod+Shift+Ctrl+Down { move-column-to-monitor-down; } + Mod+Shift+Ctrl+Up { move-column-to-monitor-up; } + Mod+Shift+Ctrl+Right { move-column-to-monitor-right; } + Mod+Shift+Ctrl+H { move-column-to-monitor-left; } + Mod+Shift+Ctrl+J { move-column-to-monitor-down; } + Mod+Shift+Ctrl+K { move-column-to-monitor-up; } + Mod+Shift+Ctrl+L { move-column-to-monitor-right; } + + // Alternatively, there are commands to move just a single window: + // Mod+Shift+Ctrl+Left { move-window-to-monitor-left; } + // ... + + // And you can also move a whole workspace to another monitor: + // Mod+Shift+Ctrl+Left { move-workspace-to-monitor-left; } + // ... + + Mod+Page_Down { focus-workspace-down; } + Mod+Page_Up { focus-workspace-up; } + Mod+U { focus-workspace-down; } + Mod+I { focus-workspace-up; } + Mod+Ctrl+Page_Down { move-column-to-workspace-down; } + Mod+Ctrl+Page_Up { move-column-to-workspace-up; } + Mod+Ctrl+U { move-column-to-workspace-down; } + Mod+Ctrl+I { move-column-to-workspace-up; } + + // Alternatively, there are commands to move just a single window: + // Mod+Ctrl+Page_Down { move-window-to-workspace-down; } + // ... + + Mod+Shift+Page_Down { move-workspace-down; } + Mod+Shift+Page_Up { move-workspace-up; } + Mod+Shift+U { move-workspace-down; } + Mod+Shift+I { move-workspace-up; } + + // You can bind mouse wheel scroll ticks using the following syntax. + // These binds will change direction based on the natural-scroll setting. + // + // To avoid scrolling through workspaces really fast, you can use + // the cooldown-ms property. The bind will be rate-limited to this value. + // You can set a cooldown on any bind, but it's most useful for the wheel. + Mod+WheelScrollDown cooldown-ms=150 { focus-workspace-down; } + Mod+WheelScrollUp cooldown-ms=150 { focus-workspace-up; } + Mod+Ctrl+WheelScrollDown cooldown-ms=150 { move-column-to-workspace-down; } + Mod+Ctrl+WheelScrollUp cooldown-ms=150 { move-column-to-workspace-up; } + + Mod+WheelScrollRight { focus-column-right; } + Mod+WheelScrollLeft { focus-column-left; } + Mod+Ctrl+WheelScrollRight { move-column-right; } + Mod+Ctrl+WheelScrollLeft { move-column-left; } + + // Usually scrolling up and down with Shift in applications results in + // horizontal scrolling; these binds replicate that. + Mod+Shift+WheelScrollDown { focus-column-right; } + Mod+Shift+WheelScrollUp { focus-column-left; } + Mod+Ctrl+Shift+WheelScrollDown { move-column-right; } + Mod+Ctrl+Shift+WheelScrollUp { move-column-left; } + + // Similarly, you can bind touchpad scroll "ticks". + // Touchpad scrolling is continuous, so for these binds it is split into + // discrete intervals. + // These binds are also affected by touchpad's natural-scroll, so these + // example binds are "inverted", since we have natural-scroll enabled for + // touchpads by default. + // Mod+TouchpadScrollDown { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.02+"; } + // Mod+TouchpadScrollUp { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.02-"; } + + // You can refer to workspaces by index. However, keep in mind that + // niri is a dynamic workspace system, so these commands are kind of + // "best effort". Trying to refer to a workspace index bigger than + // the current workspace count will instead refer to the bottommost + // (empty) workspace. + // + // For example, with 2 workspaces + 1 empty, indices 3, 4, 5 and so on + // will all refer to the 3rd workspace. + Mod+1 { focus-workspace 1; } + Mod+2 { focus-workspace 2; } + Mod+3 { focus-workspace 3; } + Mod+4 { focus-workspace 4; } + Mod+5 { focus-workspace 5; } + Mod+6 { focus-workspace 6; } + Mod+7 { focus-workspace 7; } + Mod+8 { focus-workspace 8; } + Mod+9 { focus-workspace 9; } + Mod+Ctrl+1 { move-column-to-workspace 1; } + Mod+Ctrl+2 { move-column-to-workspace 2; } + Mod+Ctrl+3 { move-column-to-workspace 3; } + Mod+Ctrl+4 { move-column-to-workspace 4; } + Mod+Ctrl+5 { move-column-to-workspace 5; } + Mod+Ctrl+6 { move-column-to-workspace 6; } + Mod+Ctrl+7 { move-column-to-workspace 7; } + Mod+Ctrl+8 { move-column-to-workspace 8; } + Mod+Ctrl+9 { move-column-to-workspace 9; } + + // Alternatively, there are commands to move just a single window: + // Mod+Ctrl+1 { move-window-to-workspace 1; } + + // Switches focus between the current and the previous workspace. + // Mod+Tab { focus-workspace-previous; } + + // The following binds move the focused window in and out of a column. + // If the window is alone, they will consume it into the nearby column to the side. + // If the window is already in a column, they will expel it out. + Mod+BracketLeft { consume-or-expel-window-left; } + Mod+BracketRight { consume-or-expel-window-right; } + + // Consume one window from the right to the bottom of the focused column. + Mod+Comma { consume-window-into-column; } + // Expel the bottom window from the focused column to the right. + Mod+Period { expel-window-from-column; } + + Mod+Y { switch-preset-column-width; } + // Cycling through the presets in reverse order is also possible. + // Mod+R { switch-preset-column-width-back; } + Mod+Shift+R { switch-preset-window-height; } + Mod+Ctrl+R { reset-window-height; } + Mod+B { fullscreen-window; } + + // Expand the focused column to space not taken up by other fully visible columns. + // Makes the column "fill the rest of the space". + Mod+Ctrl+F { expand-column-to-available-width; } + + Mod+C { center-column; } + + // Center all fully visible columns on screen. + Mod+Ctrl+C { center-visible-columns; } + + // Finer width adjustments. + // This command can also: + // * set width in pixels: "1000" + // * adjust width in pixels: "-5" or "+5" + // * set width as a percentage of screen width: "25%" + // * adjust width as a percentage of screen width: "-10%" or "+10%" + // Pixel sizes use logical, or scaled, pixels. I.e. on an output with scale 2.0, + // set-column-width "100" will make the column occupy 200 physical screen pixels. + Mod+Minus { set-column-width "-10%"; } + Mod+Equal { set-column-width "+10%"; } + + // Finer height adjustments when in column with other windows. + Mod+Shift+Minus { set-window-height "-10%"; } + Mod+Shift+Equal { set-window-height "+10%"; } + + // Move the focused window between the floating and the tiling layout. + Mod+V { toggle-window-floating; } + Mod+Shift+V { switch-focus-between-floating-and-tiling; } + + // Toggle tabbed column display mode. + // Windows in this column will appear as vertical tabs, + // rather than stacked on top of each other. + // Mod+W { toggle-column-tabbed-display; } + + // Actions to switch layouts. + // Note: if you uncomment these, make sure you do NOT have + // a matching layout switch hotkey configured in xkb options above. + // Having both at once on the same hotkey will break the switching, + // since it will switch twice upon pressing the hotkey (once by xkb, once by niri). + // Mod+Space { switch-layout "next"; } + // Mod+Shift+Space { switch-layout "prev"; } + + Mod+S { screenshot; } + Ctrl+Print { screenshot-screen; } + Alt+Print { screenshot-window; } + + // Applications such as remote-desktop clients and software KVM switches may + // request that niri stops processing the keyboard shortcuts defined here + // so they may, for example, forward the key presses as-is to a remote machine. + // It's a good idea to bind an escape hatch to toggle the inhibitor, + // so a buggy application can't hold your session hostage. + // + // The allow-inhibiting=false property can be applied to other binds as well, + // which ensures niri always processes them, even when an inhibitor is active. + Mod+Escape allow-inhibiting=false { toggle-keyboard-shortcuts-inhibit; } + + // The quit action will show a confirmation dialog to avoid accidental exits. + Mod+Shift+M { quit; } + // Ctrl+Alt+Delete { quit; } + + // Powers off the monitors. To turn them back on, do any input like + // moving the mouse or pressing any other key. + Mod+Shift+P { power-off-monitors; } + } + ''; + }; } ); }